欧美日本一道高清国产,无码日韩一区二区三区,日韩aV无码免费一区二区三区,日韩精品无码一区二区三区、亚洲Av

1. Quick-setting plugging spirit:

Quick-setting type plugging system is inorganic rigid plugging material. The product is gray powder. It can be used after mixing with water. The construction is complete and the plugging effect is fast and reliable. It is an ideal material for plugging and waterproofing of underground projects, swimming pools and toilets .

1. Performance characteristics

In case of water leakage or bucket water, stop the leakage with water to stop the leakage immediately.

The coagulation speed is fast and adjustable. By changing the amount of water added, the coagulation time can be controlled within the ideal range.

It has strong cohesive force and is used for large area slow-penetration treatment.

No * tasteless, no pollution to the environment, can be used for leakage treatment of steel structure roof waterproofing project.

2. Main technical index items Technical index

Main technical index items Technical index

Setting time (min) Initial setting ≥1

Final setting ≤10

7-day mortar impermeability (Mpa) ≥1.5

7-day bond strength (Mpa) ≥1.2

3. Key points of use

After the leaking part is chiseled into an inverted figure-shaped hole, and the ballast soil is washed away with water, the quick-setting type plugging spirit is mixed into a wet and hard material with a gray-water ratio of 1: 0.1 ~ 0.3. It can be sealed in the hole and pressed by hand or other tools for a few minutes. When the amount of water leakage is large, the cannula drainage method can be used for construction.

4. Scope of application

All kinds of brick, stone and concrete structures with new and old structures are used for water leakage, water gushing and large-scale diffuse seepage treatment. Repair cement pipes and cast iron pipes etc.

Used for sealing and waterproofing between various upper and lower pipes (casings) and concrete slabs.

Second, retarding type plugging spirit:

Retarding type leak-stopping inorganic rigid waterproof material, the product is in the form of gray powder, can be used with water and putty (or slurry), construction by scraping or brushing, can be combined with the base to form a solid whole, the waterproof effect is maintained *reliable.

1. Performance characteristics

Construction on a damp base has a better waterproof effect, and the water-repellent effect is the same on the front and back surfaces.

The waterproof, impermeable, and moisture-proof functions are unique, and they are resistant to salt and alkali.

Strong adhesion, can be combined with the base to form a solid whole, forming a permanent integral waterproof layer.

No * tasteless, no pollution to the environment, used for waterproof construction of drinking water projects, etc., the water quality meets the national drinking water standards.

2. Main technology

Item Technical Index

Setting time (min) Initial setting ≥30

Final setting ≤90

7 days coating film impermeability (Mpa) ≥0.4

7-day bond strength (Mpa) ≥1.4

3. Key points of use

According to the gray water ratio of 1: 0.4 ~ 0.5, the retarding type plugging should be made into a putty shape, and evenly scrape the pressure on the base layer with a scraper. After the layer receives water, scrape the paint twice in the vertical direction, so that it crosses vertically Complete three times in total, and spray water for three days to prevent powdering. Pay attention not to overmix each time to avoid waste. Can not be constructed below 0 ℃.

4. Scope of application

New construction of various bricks, stones, and concrete structures, waterproof, seepage, and moisture-proof construction in structures such as basements, mines, tunnels, civil air defense projects, reservoirs, and swimming pools. Waterproofing and leakage treatment of kitchens, toilets, etc. Paste decorative materials such as tiles and mosaics, and waterproof paste is completed at one time.